This tutorial will help you getting started with the use of your CNC machine using PlanetCNC software and PlanetCNC controllers. Tutorial will focus on main points when setting Offset features.Certain steps are also described in video below.
planet cnc usb controller keygen 24
In spirit of Easter holidays(with a slight delay) we decided to wipe the dust from our EggBot and see if still works. We thought that it would be perfect if we use Toslink devices to demonstrate how both, Mk3 controller and Toslink work perfectly hand in hand.
Mk2/4 and Mk3/4 use screw type connectors so you will need to use single wires to connect controller with output board. To know which output pin from controller is connected to which input of output board, please refer to tutorial in Step 1.
It is important that the version of controller(Mk2, Mk3..) connected to computer when you export your toolpath to RAW format is the same as the one that will be later executing program from SD card adapter.
Example of bad USB connection with PC as seen in UsbTreeView software:You can notice that PlanetCNC Controller is connected with PC trough various USB HUB devices(3 in total). Also, if you look closely at the USB HUB device to which PlanetCNC controller is connected, you can see that other connected devices to this USB HUB, are mass storage device and USB camera, both known as devices with huge data flow. The data flow of camera or storage device could interfere with communication of controller which as result would not perform at its best performance.
Example of good USB connection with PC as seen in UsbTreeView software:You can see that PlanetCNC controller is connected directly to one of computers root USB ports. There are no other devices connected to root hub.
To update your PlanetCNC Mk3 series controller with PlanetCNC TNG software make sure that your PlanetCNC USB driver is updated to latest version and that PlanetCNC controller is updated with latest version of CNC USB controller software. 2ff7e9595c
Comments